Utility, Rolled and Clip Angles with Custom Holes
UTILITY ANGLE/ROLLED ANGLE (RA)
PRODUCT DATA:
• Available in most sizes, lengths, and gauges
• 14ga standard right angle: 1.5” x 1.5” and 2.0” x 2.0”–16ga, 18ga standard right angle, 30mil,
20S 33mil: 1.5” x 1.5”, 2.0” x 2.0”, 3.0” x 3.0”
• 12ga, and any specialty angles > 3”x3” up to 8”x 8”
Hole Standard Offering:
• Max of 6 hole grouping pattern, next pattern 1” apart.
– 2 holes can be a max of 3” center line to center line side by
side due to the width of the drill head attachment.
– The 6 holes must be within a 10” length due to the
length of the drill head attachment
• Slots: Please inquire
• Hole sizes: (#6, #8, #10, & #12 screw sizes)
– Min hole size = 7/64” for a #6 screw
– Must have 1/8” for #8 screw
– Must have 5/32” hole for #10 screw
– Must have 3/16” hole for #12 screw
– Max hole size = 3/8”
• Dimensioned drawing or sketch of hole pattern & locations are required
Custom Hole Punch Patterns
Illustration is an example of 1 of 1000’s of possible custom hole patterns.
USES:
• For miscellaneous attachments of intersection framing components
• For attachment of joist framing components to flush mounted headers
• For attachment of solid blocking sections to adjacent studs of joists
• For alternate screw attachment of CRC bridging to stud webs in lieu direct weld
• For 90 degree corner enclosures at lapped framing location; provides in-plane stability of framework
PRODUCT DATA:
• Maximum of 6 holes per pattern grouping
• Leg 1 + Leg 2 = max of 10”, min of 1.5”.
• Clip Length = max of 17”, min of 2.0”
RIGHT ANGLE/CLIP ANGLE CUSTOM HOLES:
Custom drilled holes are available in the following gauges & sizes for right angles:
- 14ga standard right angle: 1.5” x 1.5” and 2.0” x 2.0”
- 16ga, 18ga standard right angle, 30mil, 20S 33mil: 1.5” x 1.5”, 2.0” x 2.0”, 3.0” x 3.0”
- 12ga, and any specialty angles > 3”x3” up to 8”x 8”
Illustration is an example of 1 of 1000’s of possible custom hole patterns.
